Introduction
LexTech is currently seeking Consortium partners to help fund
and set priorities for new features to be added to AFGROW over the coming years.
The following table lists a few features under development/consideration and the
currently assigned priority. These tasks may only be completed as time and funding
permits. As new items are added, It may not be possible to implement all of the
high priority items for which funding has not been allocated, and some low
priority items may be easy to add if the implemenation cost is low.
|
Stress Intensity
|
Add Advanced Solutions for part and thru-crack combinations
|
High
|
Solution Pending
|
|
Stress Intensity
|
Add Advanced Solutions for multiple corner cracks at counter-sunk holes
|
High
|
Solution Pending
|
|
Stress Intensity
|
Implement new Glinka 2-D weight function solutions
|
High
|
|
|
Stress Intensity
|
Implement beta correction for all crack tips
|
High
|
In Progress
|
|
Output Options
|
Residual Strength Plots
|
Med
|
|
|
Enterprise Features
|
Configure AFGROW to access data from a server
|
Medium
|
|
|
Output Options
|
Plot the crack length vs hours in addition to the cycles vs hours
|
Medium
|
In Progress
|
|
Stress Intensity
|
resolve the A/T limitation for advanced corner cracks at hole
|
High
|
In Progress
|
|
Stress Intensity
|
Develop new bearing offset correction for the crack(s) at hole
|
High
|
In Progress
|
|
Stress Intensity
|
Develop new bearing offset correction for the crack(s) at hole
|
High
|
In Progress
|
|
Output Options
|
Copy text from the output panel
|
Medium
|
In Progress
|
